2016年8月29日星期一

Lion Koshiare Damascus Steel Oil Quenched Full Tang Blade Japanese Samurai Sword WAKIZASHI

Lion Koshiare Damascus Steel Oil Quenched Full Tang Blade Japanese Samurai Sword WAKIZASHI


This japanese samurai sword WAKIZASHI has been hand polished and hand sharpened by hanbon forge. The full tang blade has been constructed from Damascus Steel with 13 times folding to create the 8192 layers, which cast flexibility and hardness of the blade in a large degree, the visible tenuous undulating grain on the blade was resulted from folded repeatedly during forging. This blade has been hand polished with multiple grade sharpen stone by Japanese method, which made the surface of the blade like a mirror, the blade is also very sharp. It has long HI(blood groove) on each side and a Chu-kissaki on the top of the blade. The fine finished Lion design alloy tsuba(guard) with one piece brass habaki(blade collar). Two copper Seppas(spacer) secure the tsuba of the sword. The fuchi(sleeve) and kashira(buttcap) are also made of alloy. The Tsuka(handle) has black genuine samegawa ray skin with brown chemical fiber ito which is tightly wrapped in hineri-maki method and with two bamboo mekugi pinned and two copper lion theme menuki(ornament) decorated. The Saya(sheath) has been constructed from hard wood with red high gloss finished, and brown synthetic cord has been tied around the bright copper Kurigaga (knob) of the scabbard. The Koiguchi has been hardened. This sword is well-crafted and well-assembled, it is a good choice for Dojo students, gifts, and display. It is strong enough for cutting bamboo trees (fresh),tatami or slice paper.

Contact me: hanbonforge@hotmail.com






2016年8月25日星期四

Customized Sword Set Kobuse Steel Clay Tempered Katana+Wakizashi

Customized Sword Set Kobuse Steel Clay Tempered Katana+Wakizashi

Katana:


Size: Over Length: 40.9"
        Blade Length: 27.7"
        Handle Length:10.5"
GYAKU-KOBUSE construction blade
Folded steel+1095 steel full tang blade
Differentially Clay tempered and water quenched
HAZUYA polished with multiple grade sharpen stone
High quality brass tsuba(guard) and menuki (HT024)
White genuine Ray skin Samegawa
Brown cotton tsuka-ito and thick sageo
Very Tight Hineri-maki wrap Handle
Black rayskin wrapped saya with engraved dragon pattern on each side (E08)
Double Pinned Bamboo Mekugi(peg)

Wakizashi:


Size: Overall Length:  30.7"
        Nagasa Length: 19.7"
        Handle Length: 8.1"
GYAKU-KOBUSE construction blade
Folded steel+1095 steel full tang blade
Differentially Clay tempered and water quenched
HAZUYA polished with multiple grade sharpen stone
High quality brass tsuba(guard) and menuki (HT024)
White genuine Ray skin Samegawa
Brown cotton tsuka-ito and thick sageo
Very Tight Hineri-maki wrap Handle
Black rayskin wrapped saya with engraved dragon pattern on each side (E08)
Double Pinned Bamboo Mekugi(peg)
Brass habaki and Seppas
Can be fully disassembled and assembled
Can cut the bamboo trees(fresh),tatami or slice paper
Comes with a free sword bag and certificate of authenticity.








Damascus Black Steel Clay Tempered Blade Japanese Samurai Sword Katana

Damascus Black Steel Clay Tempered Blade Japanese Samurai Sword Katana

This Katana sword is well made by hanbon forge. The blade of the sword has been constructed from black folded steel with 13 times folding to create the 8192 layers. In accordance with Japanese tradition, the blade has been treated with a clay covering, applied to the entire sword except the cutting edge. The blade is heated and quenched in spring water. The combination of the quenching and the clay cover creates a significant temperature difference in the Ha(cutting edge) of the blade and the rest of the sword. The hamon is authentic all the way up to the tip. The result is that the Ha(cutting edge) cools much more quickly than the rest of the blade, the molecules of the Cutting edge expand and push back the softer steel of the blade creating the traditional Japanese curve. The black color will not fade, unless you re-polish the blade, it can well prevent the blade from rusting. This blade has a shape in "Unokubi-Zukuri" style, there are two Hi(blood groove) on each side, one is longer and shallow which is from habaki to kissaki, one is shorter and deep which is from habaki to the middle of the blade, and it has a Chu-kissaki. The blade is full tang and hand sharpened, suitable for battle. This sword comes with a fine finished dragon design alloy tsuba(guard), and the habaki (blade collar) is a one piece brass construction. Two Seppas (spacer) secure the Tsuba. The Tsuka (handle) core is wooden and it is tightly wrapped over red genuine Ray skin Samegawa with black synthetic silk Ito. The Fuchi(sleeve) and Kashira(buttcap) are also made of alloy. The Tang of the sword is secured by two Mekugi (peg) . Two copper Menuki (ornament) are on each side of the Tsuka. The saya(sheath) is made of hard woon with black&red threadiness finished. It is durable enough for tameshigiri, bamboo, bones, iron wire, etc.

Check Product Link, see the price.
Contact me: hanbonforge@hotmail.com







2016年8月22日星期一

TRADITIONAL HAND MADE JAPANESE SAMURAI SWORD TANTO KOBUSE BLADE RAY SKIN SAYA

This is a tanto sword. The construction of the blade is GYAKU-KOBUSE, one kind of KOBUSE construction. It is constructed of two different kinds of steel, the core steel and the outer steel, where the core steel is wrapped with the outer steel. The core steel is harder than the outer steel. The outer steel was made of folded steel. It was folded 13 times creating 8192 layers for superior strength and flexibility. The visible tenuous undulating grain on the blade was resulted from folded repeatedly during forging. The core steel was made of 1095 steel. The steel has been throughly refined and tempered, a special clay is applied to the blade by hand, using a thin covering near the edge and a thicker layer over the rest of the blade. This results in a relatively quicker cooling of the edge during quenching, producing a hard edge and softer back. The beautiful real hamon on the blade is also result of the differential cooling of the blade (quenching and tempering). This blade has been hand polished with multiple grade sharpen stone by Japanese method, which made the surface of the blade like a mirror, the more importance is that the blade was polished by HAZUYA which is a very thin Uchigumori stone fixed with paper, Hazuya is a specific stone to bring up hamon. The stone is very fine and soft against the steel. the blade of this sword is completely finished with Hazuya. The work is done to get mirror-like surface on shinogi-ji and edge. High quality brass dragon design Tsuba(guard) with one piece brass habaki(blade collar), and two seppas(spacer) secure the tsuba. The Fuchi(sleeve) and Kashira(buttcap) are also made of brass. The tsuka-ito is black with alternating cross over the red real ray skin samegawa, and two dragon design copper menuki on the handle. The tang is double pinned with bamboo mekugi. The Tanto comes with a hard wooden SAYA(sheath) with samegawa covered, Same'  (ray skin )has been sanded smooth and filled with polished  lacquer. The saya has buffalo horn koiguchi, and thick yellow&brown silk sageo tied over a buffalo horn kurikata with bright copper shitodome.  This sword is strong enough to cut through a thick bamboo tree with a single strike yet sharp enough to slice paper.






2016年8月21日星期日

HUALEE SAYA CLAY TEMPERED FULL TANG BLADE JAPANESE SWORD KATANA

HUALEE SAYA CLAY TEMPERED FULL TANG BLADE JAPANESE SWORD KATANA

  This Katana sword has been hand forged using the ancient method of sword making. The blade of the sword has been constructed from 1095 High Carbon steel in a Maru style. A special clay was applied to the blade by hand, using a thin covering near the edge and a thicker layer over the rest of the blade(clay tempered). This results in a relatively quicker cooling of the edge during quenching, producing a hard edge and softer back. The beautiful real hamon on the blade was also result of the differential cooling of the blade (quenching and tempering). This blade has been hand polished with multiple grade sharpen stone by Japanese method, which made the surface of the blade like a mirror, the blade is also very sharp.This blade has no bo-hi to (blood groove) enhance its strength and cutting power. The tip of the blade is a Chu Kissaki (medium length). The Tsuba (guard) of the sword is made of brass with Snake design. The Habaki (blade collar) is a one piece brass construction. Two Seppas (spacer) secure the Tsuba. The Tsuka (handle) core is wooden and it is tightly wrapped over black genuine Ray skin Samegawa with green color synthetic silk Ito. The Fuchi (sleeve) and Kashira (buttcap) are also made of brass. The Full Tang of the sword is secured by two Mekugi (peg) . Copper snack Menuki (ornament) are on each side of the Tsuka. The saya (sheath) of the sword is natural hard wood. Thick green synthetic Sage-O has been tied around the bright copper Kurigaga (knob) of the scabbard. the Koiguchi has been hardened. The koiguchi and kojiri are made from buffalo horn. This is a sharpened, super, truly battle ready Samurai sword very suitable for iaido and kendo superior.









2016年8月19日星期五

Hand Forged Black&Red Damascus Oil Quenched Full Tang Blade Brass Koshirae Japanese KATANA Sword

Hand Forged Black&Red Damascus Oil Quenched Full Tang Blade Brass Koshirae Japanese KATANA Sword


  This katana is well-crafted by hanbon forge. It has been full hand forged, hand polished and hand sharpened. The full tang blade is made of folded steel with 13 times folding, the red blade has been special treated which create many red and black pattern on the blade. The pattern can prevent the blade from rusting. It comes with long Hi (blood groove) on each side and a Chu-kissaki. The full tang blade of the sword is secured by two bamboo Mekugi(peg). The Tsuba(guard) of the sword is made of brass with Toad design. The Habaki (blade collar) is a one piece brass construction, and two Seppas (spacer) secure the Tsuba. The fuchi and kashira are also made of brass. The tsuka(handle) core is hard wooden, and the tsuka-ito is green synthetic silk with alternating cross over the black lacquered real ray skin samegawa. Two copper toad theme Menuki(ornament) on the handle. The Saya(sheath) has been constructed from hard wood with green high gloss finished. The Sage-o is green cord, wrapped over a bright copper Kurigata of the scabbard. This sword is strong enough to cut through a thick bamboo tree with a single strike yet sharp enough to slice paper.

Contact me: hanbonforge@hotmail.com







2016年8月18日星期四

Damascus steel Dragon Musashi Katana Sword

Damascus steel Dragon Musashi Katana Sword 

   This Japanese Dragon Musashi Katana is fully traditional hand made by HanBon Forge, The blade of the sword has been hand forged using the ancient method of sword making. Full hand forged, hand polished and hand sharpened. High Carbon Steel are folded 13 times creating 8196 layers for superior strength and flexibility. the visible tenuous undulating grain on the blade was resulted from folded repeatedly during forging. The whole blade was hardened by oil tempered. The blade is hand polished and hand sharpened by 12 steps which create the surface of the blade like a morrior. The blade has long Hi (blood groove) on each side, This not only allows for a lighter blade and audible feedback when swung. but also can balance the blade to achieve optimal performance.

Contact me: hanbonforge@hotmail.com
  • Hand made 8196 layers damasucs steel blade
  • Long HI(blood grove) on each side of blade
  • heated treated and oil quenched blade
  • Full Tang Blade and double pegged with bamboo mekugi pins for added security
  • 12 steps hand polishing and sharping
  • Fine Finished Dragon Musashi tsuba(guard)
  • Dragon Theme Fuchi, kashira and menuki
  • Red silk tsuka-ito and sageo
  • Black lacquered genuine SAMEGAWA (ray skin)
  • Very Tight Hineri-maki wrap Handle
  • Black/white gloss finished saya with hardened Koiguchi (scabbard mouth)
  • One piece brass construction habaki
  • Can be fully disassembled and assembled
  • Can cut the bamboo trees(fresh),tatami or slice paper 
  • Comes with a free sword bag









2016年8月16日星期二

Wakizash-1095 high carbon steel Japanese Samurai Sword

Wakizash-1095 high carbon steel Japanese Samurai Sword 

  This Wakizashi sword has been hand forged using the ancient method of sword making. The blade of the sword has been constructed from 1095 High Carbon steel in a Maru style. In accordance with Japanese tradition, the blade has been treated with a clay covering, applied to the entire sword except the cutting edge. The blade is heated and quenched in spring water. The combination of the quenching and the clay cover creates a significant temperature difference in the Ha of the blade and the rest of the sword. The hamon is authentic all the way up to the tip. This blade has been hand polished with multiple grade sharpen stone by Japanese method, which made the surface of the blade like a mirror, the blade is also very sharp. 

  • HanBon Forge Handmade Wakizashi sword
  • AISI 1095 high carbon steel
  • Traditional construction Built for cutting
  • Differentially Clay tempered and water quenched
  • Full tang blade with mirror polishing
  • Comes with a Chu-kissaki
  • "Unokubi-Zukuri" style blade
  • Two HI(blood groove) on each side of the blade
  • Round design iron tsuba(guard)
  • Red lacquered genuine Ray skin Samegawa
  • Very Tight hinerimaki wrap Handle
  • Black synthetic silk tsuka-ito and sageo
  • Two blacked menuki on the tsuka(handle)
  • Black&red high gloss finished saya(sheath)
  • Double Pinned Bamboo Mekugi(peg)
  • Brass habaki and seppa
  • Can be fully disassembled and assembled
  • Can cut the bamboo trees(fresh),tatami or slice paper 
  • Comes with a free sword bag and certificate of authenticity.

If you want to know the price, please contact me by email: hanbonforge@hotmail.com